Warm Reminder

• Please make a partition for the new hard drive disk during the first use.
• When use finished, eject the drives then unplug the cable. Do not unplug the cable halfway to avoid data loss.
• It is an enclosure, the SSD or HDD is NOT included in the package.
• Not support 3.5"" SATA hard drives and IDE drives.
• Always safely remove your disc before unplugging this product.
• For UASP, make sure the device, OS, and controller have the UASP function enabled.

• Warm Note
• If you computer can't recognize the SSD enclosure. Please Following Steps. For new SSD, You need to go into the disk management and initialize the SSD firstly, then it could be detected and used normally. Please finish disk initialization according to the following steps.
• How to start disk management?
• Right click "Computer" - "Manage" - "Disk Management". Find your unallocated disk, right click "Unallocated", and choose "New Simple Volume Wizard".
• How to start disk management (in windows 10)?
• Click Start -> Run -> type compmgmt.msc -> click OK. Alternatively, right-click on the My Computer icon and select 'Manage'. In the console tree, click Disk Management.

Features

• Supports 7mm/9.5mm thickness HDD and SSD.
• Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
• Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port.
• Hot-swappable, plug and play, no drivers needed.
• Backwards-Compatible with USB 2.0

• System requirements:
• Available USB 3.0 port on the computer to achieve full 5 Gbps transfer speeds.
• Available USB 2.0 port on the computer to achieve full 480 Mbps transfer speeds.
• Compatibility: compatible with Windows 2003 / XP / Vista / Win 7 / Win 8 / Win 10, Mac OS, Linux 9 and above, PS4, PS4 Pro, Xbox 360, Xbox one

Wide Compatibility

Fits all brand of 2.5" SATA SSD and HDD (9.5mm / 7mm). Support Windows 2003 / XP / Vista / Win 7 / Win 8 / Win 10, Mac OS, Linux 9 and above, PS4, PS4 Pro, Xbox 360, Xbox one.

Plug and Play

Tool-free installation, plug & play, no reboot or additional driver is needed for this 2.5" SATA enclosure. From installing to using only few seconds; slide off the back cover of the hard drive reader, insert the hard drive tightly and close the lid, connect attached cable to your devices, support hot swap.

Easily Portable

Plug and play, no need of any driver/firmware/app. Designed in a miniature build, it can be used for both HDD and SDD for your requirement. You can take it anywhere if need be and does not take much space.

Why Chosse Our Hard Drive Enclosure?

• Take advantage of the lightning speed of USB 3.0 to quickly transfer files up to 5 Gbps! Connect any 2.5'' SATA III Hard Drive to your computer through an available USB 3.0 port on your desktop or laptop.
• By formatting this case with a drawer function, there is now extra protection for your hard drive. Reverse compatible with USB 2.0, this enclosure is a perfect solution for data transfers or data backup!