What can we do? Ubersweet Upgrade your old ceiling fan to Smart WiFi remote controllable one. Control the ceiling fan through remote / mobile phone / voice, control your fan from anywhere anytime. Works with CFL, LED, incandescent. [SPECIFICATION]: Max power for Fan:145W. Max power for Light: 500W(incandescent) / 150W(LED and CFL). Wireless Transmission for remote: RF 433MHz. Wireless Transmission for WIFI: 2.4GHz (not 5GHz). Battery: 2XAAA batteries (NOT INCLUDE). [Multi-functions]: 3 fan speeds: HIGH / MEDUM / LOW / OFF. 4 Countdown Timing by remote: 1H,2H,4H,8H. 12 Countdown Timing by APP: 1H to 12H. Light control: lamp ON/OFF, not dimmable. Beep on/off setting. [Package List]: Remote x1, Remote wall holder x1, Receiver x1, Instruction x1, wire nuts x5, Screws x2. [Cautions]: This device only support 2.4GHz WiFi, don't support 5GHz. Please switch your wifi to 2.4GHz. Check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size. If you have PULL CHAINS SWITCH, turn PULL CHAINS SWITCH to max speed position and turn light on. Only in this way you can get correct speed and function.

How do I connect to Alexa?

The following is an example using Amazon Echo

1. Complete product networking configuration in the Smart Life App

Complete the device's networking configuration according to the prompts in the App

Note: In the App, change the name of the device to an easily identifiable name such as Alexa; names are usually in English, such as "bed light"

2. Configure the Amazon Echo device

(If you have already configured Amazon Echo, you can skip this step. The following instructions are based on the iOS client)

1. Make sure your Amazon Echo device is powered on and connected to a Wi-Fi network.

2. Open the Alexa app on your phone. After successful login, tap on the menu in the upper left corner of the Home page, select "Settings" and tap "Set Up A New Device" to set up the Amazon Echo.

3. Choose your Amazon Echo device type and language for connecting. Press and hold the small dot on the device until the light turns yellow. Then tap "Continue" to connect to the hotspot.

After connecting to the Amazon Echo hotspot, return to the page. At this point, the connection is successful. Tap "Continue" to proceed to the next step. Choose a Wi-Fi network to connect to. Amazon Echo will take a few minutes to try to connect to the network.

4. After the network connection is successful, Tap “Continue." An introduction video will appear. After the video ends, Tap “Continue” to jump to the Alexa Home page. You have now completed the Amazon Echo's configuration process.

3. Key step - link Skill

1. Tap on "Skills" in the Alexa app menu.

2. Then search for "Smart Life". Tap "Enable" to enable the Skill.

3. Enter the Smart Life APP account and password, then tap “Link Now” to link your Smart Life account to enable the Skill. Now you can start your smart home journey.

Common commands

Control the device via voice commands Now you can control your smart device with Echo. You can control your device (such as your bedroom light) with the following commands:

Alexa, turn on/off bedroom light. (Turn on/off the light)

Alexa, set bedroom light to 50 percent. (Set the light to any brightness)

Alexa, brighten/dim bedroom light. (Increase/weaken the brightness of the light)

Alexa, set bedroom light to green. (Adjust the color of the light)