Product description

SHOPGINY 88A Ultra Black Toner Powder has been sourced with optimum specification that could be able to refill with both OEM as well as any compatible cartridge. Toner powder vary based on its quality and material formula, low cost toners do not work well on OEM cartridges whereas a special formulated premium quality toner at optimum cost level can perform well with OEM and compatible cartridge.

User friendly:

Toner is a powder mixture of granulated plastic, carbon powder and iron oxide, however, mixtures have since been developed containing polypropylene, fumed silica, and various minerals for triboelectrification. SHOPGINY s toner powders are plant-derived plastic which is an alternative to petroleum plastic that results in saving the environment.

Specialty

• Ultra Black, Special formula toner powder- Good liquidity, strong adhesion mechanical test to ensure the toners smooth operation, Maximum print resolution: 4800 x 1200 DPI.
• Crystal Clear Prints- Hassle-free refilling of toner cartridge to ensure crisp, clear and retainable prints on a wide range of surface media. Toner particles are melted by the heat of the fuser, and are thus bonded to the paper. This toner powder provides firm fusion that last for a good amount of time without losing impression.
• Compatible Printers - HP LaserJet Printer P1007, P1106, P1108, P1008, M1213nf MFP, M1136 MFP, M126nw MFP, M1218nfs, M128fw MFP, M128fn MFP, M226DW and M226DN
• Page Yield: Typically each 80gram of toner is supposed to deliver 15 ~ 19 pages @ 5% coverage standard (ISO/IEC 19752).

Big savings on cost

• No matter which branded toner you are using, it will definitely save you money in the long run without affecting the print quality; its printing costing is quite low as compared to OEM toner.

Toner Powder Refilling Instructions:

• Remove all the unused and waste toner from hopper.
• Shake bottle well before opening.
• Keep bottle mouth away from your face while opening the seal.
• Use snout for ease of dispensing toner.
• Fill toner through the Mag roller opening or through the fill hole.
• Keep away from humid areas.