Camera working voltage is 5V1A. Continuous power supply is necessary to operate the product, not working on battery power. The maximum storage memory is 64GB. Differences between AP mode and WIFI mode: when at home, AP mode is adopted to conduct supervision anytime and anywhere ;When not at home, switch to WIFI mode, even if not at home, but also remote viewing.

Features:

1.Support All Smart Phone and PC monitor, wherever you can watch

2.Infrared night vision, 5-10 meters visible at night 3.1080P HD, the resolution is 1.3 Megapixel image, the video and picture is more clear and smooth 4.Two way audio, you can talk each other 5.Better Day Night Vision, it will switch from day to night automatically Power ON the device. Device prompt "Access Point Established" When the (MV+ID) hotspot signal is found in the Wi-Fi list of the mobile phone, it means that the device is in the waiting configuration state

4. Open the V380 Pro APP,

5. Click the + button in the upper right corner of the device list -> select [Add Camera]

6. Select [Wi-Fi Smart Camera]

7. Select [AP hotspot connection] and follow the system prompts to continue operation

8. Select the Wi-Fi that the device needs to configure, and enter the Wi-Fi password -> click [Confirm]

9. Below Android 10: Select the device hotspot, and the mobile phone will automatically start network configuration after connecting to the hotspot Android 10 and above: Click [Connect AP spot] or enter the mobile phone system [Settings], select [WIFI], connect to the device hotspot (MV+ID), and the device will automatically connect to Wi-Fi after returning to the app 10. Click the monitoring interface and set the user and password as shown in the following figure (the default password is empty when the device is manufactured, which needs to be set before it can be used).