JK plus Wiring type: fixed terminal Standby Current: <5MA RF Frequency: 433Mhz Receive sensitivity: >97dbm Output Terminal: NO, NC, COM RF working mode: superheterodyne Decoding mode: MCU software decoding Transmitting distance: >100m (open space) Support remote type: Learning code, Fixed code(Rolling code can be design) Working mode: Momentary, Toggle, Latching Time delay (5s ,10s ,15s) About Working mode: Momentary: Push the remote button, the relay connects, release the remote button, the relay dis-connects. Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects . Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect. Time delay mode: Push the remote control button, the relay connects, from when release the remote button, after 5s or 10s or 15s, the relay disconnect automatically. Clearing the code: Push the learning button on the receivers for 8 times , the codes will be cleaned. After clearing the code, all the remote control cannot work any more. 1. Learning the code: (Momentary) Push the learning key on the receiver once time, it comes into momentary setting mode. Wait for a moment, the LED will be off , it comes into learning state. Push the remote button, LED indicator on the receiver board will flash then come off. After 3 seconds, the LED indicator will be on again, learning successfully. 2. Learning the code: (Toggle) Push the learning key on the receiver twice time , it comes into toggle setting mode Wait for a moment, the LED will be off , it comes into learning state . Push the remote button, LED indicator on the receiver board will flash then come off. After 3 seconds , the LED indicator will be on again , learning successfully. 3. Learning the code: (Latching) Note: When you choose for latching mode , in order to learn more remote control, you need to learn two different button, the first time learnt is for "ON", the second time learnt

24 Volt AC power Supply for your electronic door lock with 3 remotes and receiver is inside the power supply. It does not include electronic door lock.