G1109P-8-102W is a 9-Port Gigabit Desktop Switch With 8-Port PoE developed by IP-COM. It provides 8 10/100/1000 BASE-TX RJ45 ports. Ports 1 to 8 support IEEE 802.3af PoE standard with each port providing power of 15.4W, or support IEEE 802.3at PoE+ standard with each port providing power of 30W. The whole switch provides power up to 92W. By using CAT5 twisted pairs, it can provide power and transmit data to APs, IP cameras, IP phones, and so on. In addition, all ports support 6 kV lightning protection, Port based VLAN, making your network deployment more convenient and cost-effective.
Standard&Protocol - IEEE 802.3/IEEE 802.3u/IEEE 802.3x/IEEE 802.3ab/IEEE 802.3af/IEEE 802.3at
Indicator - 9*Link/Act per device, 1*Power per device
Interface - 8 10/100/1000M Base-T ports(Data/Power), 1 10/100/1000M Base-T ports(Data)
Port - Lightning Protection 6KV
Store and forward - Yes
Exchange Capacity - 18 Gbps
Packet forwarding rate - 13.39 Mpps
MAC Address Table - 16K
PoE supply management - Port 1-8 support IEEE802.3at/af PoE standard
PoE through pin - 1 2 4 5 +;3 6 7 8 -
Voltage input range - AC: 100-240V?50/60Hz, DC?51V 2A
Power Consumption - In full configuration: 102W, PoE Max Power Supply: 92W
Port Features - Standard:the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. VLAN:ports 1 to 8 are isolated from each other,but can communicate with ports 9 (uplink port) respectively.
Environment - Operating Temperature: 0?~40?(32?~104?) Storage Temperature: -40?~70?(-40?~158?) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
Eight gigabit PoE ports, one gigabit uplink port, and 2Mb built-in packet buffer outstand in comparison, ensuring smooth transmission of large files and HD videos.
Ports Ports 1-8 comply with the IEEE802.3af and IEEE802.3at power supply standards. Theentire switch offers a maximum PoE power output of 92W, whereas each ports offers amaximum PoE power output of 30W. The ports can be used to supply power to and exchange data with APs and IP cameras.
Hardware DIP switch for selection among the Standard, VLAN modes. Switch to VLAN mode to prevent broadcast storm and defend against DHCP spoofing .
