AUSHA 3.5mm AUX Stereo Bluetooth 5.0 Transmitter Receiver

Product Features: 1.This extremely portable, lightweight wireless audio transmitter & receiver is an ideal wireless audio solution for a wide range of situations and uses 2.Transmitter mode:wirelessly streams audio from your non-Bluetooth TV, home stereo system, or CD player to your Bluetooth headphones or speakers 3.Receiver mode: wirelessly streams audio from your Bluetooth-enabled phone, tablet, or computer to your wired stereo, speakers, or headphones. 4.There is no built-in battery, and it is powered by DC 5V usb interface: A.Insert usb power, the red light is on in the transmitting mode, the red light flashes when pairing, and the red light is always on after the pairing succeeds. B.Insert usb to power on, the receiving mode is blue light, the blue light flashes when pairing, the blue light is always on after pairing is successful. 5.Broad Compatibility: With the included 3.5mm cable, this Receiver Transmitter adapter can widely be used on your computer, laptop, home stereo system, headphone, smartphone, Mp3 player, CD player, etc.

2 in 1 Bluetooth Transmitter and Receiver

No driver / software installation required

By connecting the Bluetooth aux adapter to non-Bluetooth device, stable wireless connection with various Bluetooth devices within 33FT can be achieved. The receiving or transmitting of audio can also be realized. This way, you can enjoy wireless music and listen to late-night shows without disturbing your loved ones' sleep.

Package

1 x 3.5mm Wireless Audio Adapter; 1 x 3.5mm Audio Cable ; 1 x User Manual

Specification

• Bluetooth Version: V5.0
• Input Interface: micro USB
• Input: 5V/1A
• Wireless Range:33ft/10m (Operating range can be affected by multiple factors)

Two Bluetooth Modes, Four Connection Methods

Transmitter mode (Red light)

• 1.Plug The receiver to your usb power, Switch to Red Light flashing;

• 2.Use the 3.5mm AUX/RCA cable to connect The receiver with your non-Bluetooth e.g.TV/PC/Laptop/CD Player/MP3/MP4;

• 3.Turn on your bluetooth headphone or bluetooth earphone into pairing mode.

• 4.Put it near to The receiver, Then it will automatically pair with your Bluetooth headphones or bluetooth speakers(When paired successfully,Red light will Stop flashing).Then you can listen sound from the TV/PC/Laptop to bluetooth headphone/bluetooth speaker.

Receiver mode (Blue light):

• 1.Plug The receiver to your usb power,Switch to Blue Light flashing;

• 2.Use the 3.5mm AUX/RCA cable to connect The receiver with your non-Bluetooth e.g.Car/Wired Speaker/Amplifier;

• 3.Open your Tablet/Smartphone's bluetooth,Search The receiver,Then pair with it(When paired successfully,Blue light will stop flashing). Then you can listen sound from the tablet/smartphone to your Car/Wired Speaker/Amplifier.

• when you first insert The receiver, the light is Red, it is in TX (Transmitter)Mode, which will not switch to RX Mode automatically. It needs you to unplug The receiver and then insert again, the light will become Blue, and it is in RX(Receiver) Mode now.
• Sometimes when you in the same mode for long time, you need to repeat unplug and insert twice and it will change to the other mode, please remember:
• Red Light: TX Mode, Blue Light: RX Mode

Note:

• A single adapter cannot transmit and receive audio at the same time, only as a separate receiver or transmitter.
• Only one device can be connected at a time.
• Phone calling are not supported.
• Cannot achieve stereo.
• 3.5mm audio cable is used to transfer audio. (Except for PC, PS4, and speakers that support USB flash drives)
• Connecting the audio cable and USB port to the same device may cause noise. Try to power the product in other ways.
• When pairing with a Bluetooth headphones/speaker, please turn off the Bluetooth of nearby Bluetooth devices to avoid affecting the pairing.